18^th Annual Meeting on Oral Care & Oral Cancer October 24-25, 2018
Boston, Massachusetts, USA

Biography:

Entrepreneur, out of box thinker, his interest primarily in dentistry. However, as his profile indicates, very open to new challenges, especially when he sees where

a trend in technology is moving. He is personable, a people person who enjoys being a team member, being involved in product development, manufacturing,

marketing and sales strategies. Training people on new products or technology. Mentoring and having mentors is important to me, he feels everyone has knowledge

that they can pass on to others with whom they communicate. Setting goals is very important in life, career and profession. Religion, family, friends, volunteering for

wounded warriors and a variety of recreational activities. His hobby is custom knife making for outdoorsmen and collectors.

 

Abstract:

Aerosol ceramic bonded titanium substructures and abutments

Ceramic coated dental abutments offer dental professionals an alternative to zircon abutments in anterior regions of the

mouth for esthetics and strength. For many decades dental professionals and dental patients had no alternative for titanium

abutments. Esthetics became a problem in many cases as the tissue is translucent, a grey shadow of the alloy would be visible

under the tissue above or below the porcelain fused to metal or all ceramic restorations. Dental ceramic manufacturers attempted

to resolve the problem with a hand applied bonding agent applied with a brush to the abutment and fired. The next step was to

brush on a tooth-colored opaque over the bonding layer to hide the grey alloy. This method was both times consuming and if

there was an area that was applied too thick in the bonder the ceramic would delaminate from the abutment or substructure.

The alternative became the use of zircon abutments as they are white in color. Even with the strength as with any ceramic when

it is thin and unsupported it will break. The problem with zircon used in the anterior regions of the mouth is many times they

are small and break during seating or afterward when stressed by the patient in bruxing or biting into food which applied

stresses to the anterior restorations causing the zircon abutment to break off the implant in the mouth. To resolve this problem

the best alternative was to apply ceramic binder and opaque with the aerosol application. The aerosol application provided the

thin even layer of bonder to the abutment or substructure for the optimal strength of bonding colored ceramic to the abutment.

This application resulted in the strongest ceramic bond to titanium in the dental profession and the strength of titanium without

the grey shadow under the translucent tissue

Biography:

Ayman Hegab is a clinical associate professor of Oral & Maxillofacial Surgery, Faculty of Dental Medicine. Al-Azhar University, Cairo, Egypt. Member of Egyptian

Dental Association. Member of the Egyptian Society of Oral & Maxillofacial Surgeon. Doctor’s Degree (PhD) of Oral & Maxillofacial Surgery focuses on the Alveolar

Cleft, Faculty of Dental Medicine. Al-Azhar University, Cairo, February May 2007. Master’s Degree (MSc) of Oral & Maxillofacial Surgery focuses on the TMJ

Surgeries, Faculty of Dental Medicine, Al-Azhar University, Cairo, December 2003. Bachelor Degree (BDS) of Dental Medicine & Oral Surgery, Faculty of Dental

Medicine, Al-Azhar University, Cairo, May 1997. He has the privilege to design and introduce Tooth-Borne, Custom-Made Distraction Device for closure of the

alveolar cleft which is approved by American Journal of Oral and Maxillofacial surgery (Hegab Alveolar Distraction Device). Also, he has the privilege design and

introduces split acrylic splint for treatment of pediatric mandibular fracture which approved by the British Journal of Oral and Maxillofacial Surgery (Hegab Pediatric

Mandibular Fracture Device). He has over 20 publications in peer-reviewed journals. He is one of AEEDC Young Researcher Award Participants for 2012 & 2013.

He was speaker in many of the international conferences in USA, Qatar and UAE.

 

Abstract:

Big data? Big deal… what do I do with it?

We all have the luxury of big data surrounding every aspect of our dental offices including new patient visits, average

production per visit, cost per acquired patient, twelve-month production average and patient-to-patient referral

numbers. We all spend millions of dollars annually on SEO, pay-per-click, direct mail and anything else to get the phone to

ring. We see our results daily, weekly and monthly but can’t seem to move the needle. We know why it’s important and how it

is useful for improving operations. But how do you make it just as important to the working dentist at your practices? What’s

the best delivery method so you can build value in your brand and improve your relationship with your providers? And finally,

how do you get buy in from the teams so you can stop spinning your wheels? Ray Caruso brings his unique presentation style of

humor mixed with straight-forward common sense, to answer the questions we all want to know. His experience working with a

variety of payor-mix offices throughout his career prepares all owners, leaders and teams to unpack office cultures, know doctor

and team agendas and deliver on execution and change. You will walk away with the ability to not only interpret and understand

data but have tools and concepts to create an action that makes a difference. Ray Caruso is the CEO of Lone Peak Dental

Group, a collection of specialty dental practices throughout the United States. His early days with Heartland Dental shaped his

business acumen and provided the basis for his growth into new operational roles. He later joined Decision One in Chicago as

their COO, tripling their revenue and profits in three years. Finding and getting the most out of amazing people is his greatest

strength. At Lone Peak Dental, he built an infrastructure necessary to support and grow it into a $70million dollar company.

 

 

Biography:

James D Bates, DDS, M.D., is an American board-certified oral and maxillofacial surgeon in active private practice in Dallas, Texas. Originally from Lubbock, Texas,

he attended Texas Tech University as an undergraduate. He graduated with many honors from The University of Texas Dental Branch at Houston with a DDS degree

and from Texas Tech University School of Medicine with an M.D. degree. In addition, he completed an internship in general surgery at Baylor University Medical

Center and completed an accredited residency in oral and Maxillofacial surgery at The University of Texas Health Science Center in Houston. As a part-time faculty

member at Texas A&M Baylor College of Dentistry in the Department of Oral and Maxillofacial Surgery, he taught physical examination and internal medicine to

graduate students in all specialties as a clinical associate professor for 18 years. As the founder of Texas Oral and Maxillofacial Surgery, his practice is proud to have

maintained 12 years of continuous Accreditation as an Office-Based Surgery Practice by the internationally-recognized Joint Commission. His practice focuses on

providing full-scope oral and maxillofacial surgery services Including orthognathic and TMJ surgery.

 

 

Abstract:

Diagnosis, nonsurgical and surgical treatment of obstructive sleep apnea

Sleep-disordered breathing is a hot topic in dentistry and medicine today. Dentists are in a unique position to screen for,

diagnose and treat their patients with obstructive sleep apnea. OSA is a serious, potentially life-threatening condition which

can result in hypertension, congestive heart failure and even death. This presentation will cover the screening, diagnosis and

contemporary management of sleep-disordered breathing in a comprehensive format, both for the general restorative dentist,

the orthodontist and the oral and maxillofacial surgical specialists. From the medical history and clinical examination, to

radiographic and diagnostic imaging findings, to a detailed discussion of the clinical polysomnogram and sleep medicine

consultation referral, to mandibular advancement oral appliance therapy and CPAP therapy, to Upper airway surgery including

uvulopalatopharyngoplasty (UPPP), laser-assisted uvuloplasty (LAUP), nasal septoplasty, inferior turbinectomy, tonsillectomy

and adenoidectomy, radiofrequency tongue and soft palate ablation, to maxillomandibular advancement and genioglossus

advancement, to tongue and hyoid suspension, this presentation will provide direct and practical real-life ways to improve the

health and prolong the life of your patients with maximal fulfillment in return.

 

 

Biography:

Abdallah completed his PhD from University of Alexandria, Egypt & postdoctoral studies from the University of Illinois at Chicago 1983. He has published more than

30 papers in reputed journals and has been serving as an editorial board member of reputed journals.

 

 

 

Abstract:

Clinical evaluation between zirconia crowns and stainless steel crowns in primary molars teeth

Introduction and Research Problem: The aim of this project is to evaluate and compare two full coronal restorations on

primary posterior molars over a period of 3, 6 and 12 months in terms of restoration failure, marginal integrity, proximal

contact, secondary caries, occlusion and gingival response. The restorations types are Stainless Steel Crowns (SSC) and NuSmile

Zirconia Crowns (Nu/ZR).

Materials and Methods: Children attending the King Abdulaziz University, Faculty of Dentistry (KAUFD) clinics who need

restorations will be screened for inclusion criteria till 120 teeth are recruited (60 teeth for SSC restorations and 60 for Nu/ZR

restorations). The split-mouth technique will be used to ensure equalizing variables for both groups, each patient will have side

restored with SSC and the opposite side will be restored with Nu/ZR crowns. Randomization will be done using SPSS software

version 20.0 (Armonk, NY; IBM Corp.) for each age group separately with a uniform random variable generation. A simple

descriptive statistics will be used for analysis and a T-Test with Wilcoxon Signed-Rank will be used. Level of significance will be

set at (α = 0.05) and level of confidence at (95%).

Summary of Results: At 6th month all samples under group Zirconia already improved while only 73.3% from SSC while the

remaining samples happened to have positive changes at the 12th month. Regarding the plaque retention also the zirconia

crowns shows improve performance than SSC.

Conclusion and Recommendations: As both SSC and Zirconia crowns presented to be an excellent choice for posterior teeth

restorations, however, we can conclude that zirconia crowns performed better regarding gingival response to the material of

restoration and plaque retention despite its high cost.

 

Biography:

 

In 2008 Maxim Ashortia graduated from the Moscow State University "Business organization and enterprise management". He is the speaker in the dental industry,

the author of courses held in Russia, CIS countries, Europe and the United States. He is the head of the digital technology laboratory and training center "Dental

Boutique" included in the list of countries officially recommended by exocad. Leading specialist in the dental industry. He is the creator of the anatomical design of

the teeth "Ashortia" for the exocad company, popular with specialists from all over the world, integrated into the world-famous brand.

 

Abstract:

WOW effect, client capture using digital technologies

Clients capture using digital technologies, both for laboratories and for dental clinics. Today, a modern dentist and technician

have a great opportunity to digitize the patient completely. These are face scans and intraoral scans. Advantages of the

laboratory that has acquired these technologies: We can provide dentistry services for "Off-site Laboratory", where our specialist

arrives from the laboratory with the equipment, within 20 minutes completely digitizes the patient, conducts a scan of the face,

oral cavity and immediately proceeds to the laptop to simulate a virtual wax -up adjusting the aesthetics in the presence of a

patient and a doctor, the result is immediately visible on the screen, rotating the patient's 3D face. This business policy in our

practice has attracted a large number of new orders, within 3 months, increasing the turnover of the laboratory by 300%. A

dentist having such a technology makes a great impression on the patient, the shape and aesthetics of a smile can be adjusted

in the presence of a patient, you can create a future design together, patients like it very much, send it to a mobile device for

viewing at home. The advantage of an intraoral scanner: after scanning the oral cavity in color, you can display the state of teeth

and bite on the large screen, increasing and rotating the scanned jaws, which is more convincing for the patient in the need to

treat other teeth. Another application of the intraoral scanner is the "Smile Bank" where you can offer young people the service

to scan their beautiful teeth and save STL files in the cloud and if necessary even after 20-40 years you can always go back to the

dentist with the request to restore the smile of his youth, having their own young scans. This is just some area of application of

digital technologies for increasing the comfort and profit that I would like to share.

 

 

Biography:

Eduard Babulak, is accomplished international scholar, researcher, consultant, educator, professional engineer and polyglot, with more than thirty years of

experience. His research was cited by scholars all over the world. He serves as chair of the IEEE Vancouver Ethics, professional and conference committee.

His academic and engineering work was recognized internationally by the Engineering Council in UK, the European Federation of Engineers and credited by the

Ontario Society of Professional Engineers and APEG in British Columbia in Canada. He was awarded higher postdoctoral degree DOCENT - Doctor of Science

(DSc) in the Czech Republic, PhD, MSc and High National Certificate (HNC) diplomas in the United Kingdom, as well as, the MSc and BSc diplomas in Electrical

Engineering Slovakia. He serves as the Editor-in-Chief, associate Editor-in-Chief, Co-Editor and Guest-Editor. He speaks 16 languages and his biography was cited

in the Cambridge Blue Book, Cambridge Index of Biographies,

 

Eduard Babulak, is accomplished international scholar, researcher, consultant, educator, professional engineer and polyglot, with more than thirty years of

experience. His research was cited by scholars all over the world. He serves as chair of the IEEE Vancouver Ethics, professional and conference committee.

His academic and engineering work was recognized internationally by the Engineering Council in UK, the European Federation of Engineers and credited by the

Ontario Society of Professional Engineers and APEG in British Columbia in Canada. He was awarded higher postdoctoral degree DOCENT - Doctor of Science

(DSc) in the Czech Republic, PhD, MSc and High National Certificate (HNC) diplomas in the United Kingdom, as well as, the MSc and BSc diplomas in Electrical

Engineering Slovakia. He serves as the Editor-in-Chief, associate Editor-in-Chief, Co-Editor and Guest-Editor. He speaks 16 languages and his biography was cited

in the Cambridge Blue Book, Cambridge Index of Biographies,

 

 

Abstract:

Effect of different teas of surface roughness of resin composite

The aim of this study was to investigate the effects of different teas on surface roughness of anterior composites. In this study

Gradia direct Anterior, Clearfil Mejisty ES-2, Tokuyama Estelite quick and filtek ultimate were used as the composite material.

The teas used in the study were Lipton and Rosehip, Lipton black tea & Lipton green tea. For each tea groups 10 samples each

different composite material was prepared. Each sample was polymerized from upper from bottom surface for 20 seconds was

stored in distilled water at 37oC for 24 hours. Surface roughness measurements were performed at the beginning, at the end of

the 15th day and at the end of the one- month by using profilometer. Each composite material was kept in 3 different teas for 30

minutes for twice a day for one month during the morning and evening. Data were statistically analyzed by using one-way Anova

(p< 0.05) initial surface roughness value of Gradia direct anterior (0.751- Ra) and Filtek ultimate (0.900- Ra) presented higher

than other two composites(p< 0.05).Surface roughness value of all composites storage in Rosehip tea, Black tea, and Green tea

exhibited similar results at the end of one month. Significant differences were observed among teas for Filtek Ultimate, Gradia

Direct Anterior and Tokuyama Estelite Quick at the end of one month. Surface properties of composites used in this study were

found to be stable. Tokuyama Estelite quick presented the minimum surface roughness value while the maximum value was

Filtek Ultimate.

 

 

Biography:

Kanwaldeep Singh Soodan is associate professor/reader at MM College of Dental Sciences and Research, India. He completed his BDS from Magadh University

(India) in 2003. He did his MDS (Oral & Maxillofacial Surgery) from Bharati Vidyapeeth University, Pune (India) in 2009. He has working experience in Cleft &

Cranio-maxillofacial Surgery Unit (Chennai, India) and Tata Memorial Cancer Hospital (Mumbai, India). He has published 15 international and 14 national articles

till date. He has 8 International book publications to his credit. During his post as Associate professor/Reader, he has completed 2 Research works and in progress

with 2 more. He has done international and national presentations. He has received appreciation letters from patients and principals of college. He is Editorial board

member to 5 international Journals, 4 national journals and Reviewer to Pubmed indexed journal. He was nominated for “Academician of year” award at Famdent

dental excellence award, Mumbai, India in 2016. He has acted as “Chairperson” during the scientific deliberations at State level and Annual conference of AOMSI

 

Abstract:

A single-blind randomized control trial was carried out on 50 healthy outpatients who required surgical removal of

mandibular third molars under local anesthesia were selected. The patients were divided into 2 groups (n=25), the

treatment (PVP-I) and control group (normal saline). The treatment group patients were irrigated using PVP-I 2% (w/v)

(Betadine, Win- Medicare, India) during bone guttering and tooth sectioning. The control group patients were irrigated with

saline (sodium chloride 0.9%, w/v; Parenteral Drugs, India) only. Procedures that exceeded more than 1 hour were excluded

from the study. Using Pederson difficulty index, patients with moderately difficulty index were chosen. All parameters for

swelling were recorded preoperatively, on the first, second and seventh postoperative days for both procedures. The data were

statistically analyzed using SPSS (version 22.0) software. Independent t-test was applied for an operative time in minutes and

the two groups matched (p>0.05) for operative time. For change in swelling, T-tests was applied and we found an increase in

swelling in the saline group which was highly significant for change from preoperative to day 2 (p=0.005) and from preoperative

to day 7 (p-value<0.001). Mean for Pederson index for betadine and saline group was found out to be same (P=1). PVP-I 2%

was found out to be significantly reducing swelling as compared to saline suggesting that it acts as an anti-oedematous agent in

mandibular third molar surgery.

 

 

Biography:

Abdul Waleed Nejrab is working as a professor in Kabul University of Medical Sciences, Afghanistan

 

Abstract:

Dental Marketing and network issues

Dentistry is a humble profession that needs planning and preparation. The stages of dental practice may make or break your

practice. This lecture provides guidelines to your practice life cycle and how/what approach to use per stage. When do you

start and when are you going to stop your practice?

Inside the program:

Introduction to your IDEA

One by one stage

Marketing Program for your practice.

The objective of the Lecture:

The lecturer’s objective is to be able to share and help each and every practicing dentist

Identify where they are and where they are heading.

 

 

Biography:

Jona J Sela has been appointed full professor of Oral Pathology by The Hebrew University, Jerusalem, Israel at the age of 40 years. He served as Head, Division

of Oral Pathology and Chaired the Institute of Dental Reseach. Currently, director of the Laboratory of Biomineralization. He authored more than 250 publications

including books and has been serving as on editorial boards. His research interests comprise gene-expression of bone cells around dental and orthopedic implants.

His book "Principles of Bone Regeneration" was published by Springer Verlag US.

 

 

Abstract:

Basic aspects of bone reaction to implants

A large variety of metal and ceramic devices are being introduced, on a daily basis, into bones. The appliances are implanted

in order to enhance healing, function and mobility. Bone repair adjacent to implants is a multi-factorial process wherein,

the foreign material is required, ideally, to produce a state of non-interference with normal osseous regeneration. The added

value of implant introduction comprises restoration of biomechanical properties. Ultimately, this process should involve an

improved formation of the mineralized matrix at the injured sites and an enhanced positive shift of bone remodeling balance.

Specifically, implant effect on bone healing involves a range of environmental, endocrine, mechanical and chemical variables

leading to changes in tissue, cell and gene expression. This is presented by the enhancement of guided action of osteoblasts and

chondroblast to produce osseous tissues that restore the skeletal load bearing capacity. Concomitantly, osteoclasts are involved

in the shaping of tissue healing. Recently, regulatory aspects of bone remodeling have been revealed. The findings disclosed

new modalities for induction, enhancement and guided repair in conditions such as intraosseous implants, nonunion fractures

and critical size defects. Various approaches to the treatment of these conditions are currently under basic, translational and

clinical research. These range from advanced methods for tissue engineering, gene and cell therapies involving identification

of active molecular target approach to the development of sophisticated biomaterials for implant surgery. In view of the

multidisciplinary nature of these efforts, the present talk addresses modern aspects of bone healing, with a special attempt to

enhance convergence of different experimental and clinical approaches designed for the study of implants and bone healing in

its diverse forms and under various conditions. The information and ideas provided should be of value for the understanding

of implant rejection in particular and at a broader view, to the experimental skeletal biologists and clinicians in the perception

of healing and regenerative processes.